SolidWorks 2013 Validation Code: Tips and Tricks to Avoid Common Errors
SolidWorks 2013 Validation Code: What You Need to Know
SolidWorks is a powerful computer-aided design (CAD) and computer-aided engineering (CAE) software that helps you create, simulate, publish, and manage your 3D models. Whether you are a professional engineer, a student, or a hobbyist, SolidWorks can help you bring your ideas to life.
!!TOP!! Solidworks 2013 Keygen Validation Code
However, to use SolidWorks, you need a valid license and a validation code. A validation code is a unique alphanumeric code that verifies that your license is genuine and that you have the right to use the software. Without a validation code, you cannot activate your license and use SolidWorks.
In this article, we will explain what SolidWorks 2013 is, why you need a validation code, how to get one, and how to troubleshoot common issues with it. By the end of this article, you will have a better understanding of how to install and use SolidWorks 2013 with confidence.
What is SolidWorks 2013 and why do you need a validation code?
SolidWorks 2013 is the 21st major release of SolidWorks, which was launched in October 2012. It offers many new features, functions, and capabilities that enhance your design process and productivity. Some of the top enhancements of SolidWorks 2013 are:
Data validation in design tables. You can choose values from a drop-down list of valid selections for certain parameters in your design tables. This helps you avoid errors and inconsistencies in your configurations.
Conic sketch tool. You can create conic curves in sketches by specifying the start point, end point, and rho value. Conic curves are useful for creating smooth transitions between curves or creating complex shapes.
Varying dimension patterns. You can create linear or circular patterns with dimensions that vary according to a table or an equation. This allows you to create complex patterns without using multiple features or equations.
Intersect feature. You can create solid or surface bodies by intersecting existing bodies. You can also use this feature to trim or split bodies or to add or remove material.
Previous release interoperability. You can open SolidWorks 2014 files in SolidWorks 2013 Service Pack 5 without losing any feature data. This enables you to collaborate with users who have different versions of SolidWorks.
To use these features and more, you need a validation code for SolidWorks 2013. A validation code is required for every installation of SolidWorks on an individual computer or on multiple clients using an administrative image. A validation code ensures that you have a legal copy of the software and that you are not violating the terms of the license agreement.
How to get a validation code for SolidWorks 2013?
To get a validation code for SolidWorks 2013, you need to have your SolidWorks serial number ready. Your serial number is a 24-digit code that identifies your product and license type. You can find your serial number in several ways:
If you have purchased SolidWorks online, you will receive an email with your serial number.
If you have purchased SolidWorks from a reseller, you will receive a DVD case or a card with your serial number.
If you have installed SolidWorks on your computer, you can find your serial number by clicking Help > About SolidWorks.
If you have registered your product on the SolidWorks customer website, you can find your serial number by logging in and clicking My Products.
Once you have your serial number, you can get a validation code for SolidWorks 2013 by following one of these methods:
Using the SolidWorks installation media
If you have the SolidWorks installation DVD or a USB drive, you can use it to install and validate SolidWorks 2013. Here are the steps to follow:
Insert the DVD or USB drive into your computer and run setup.exe.
On the Welcome screen, click Install on this computer.
On the Serial Number screen, enter your serial number and click Next.
On the Summary screen, review the installation options and click Install Now.
Wait for the installation to complete and click Finish.
On the Activation screen, select Automatically over the Internet and click Next.
Wait for the validation code to be generated and displayed. You can also choose to receive an email with the validation code.
Click Finish to complete the activation process.
Using a download directory on a server
If you have downloaded SolidWorks 2013 files to a shared folder on a server, you can use it to install and validate SolidWorks 2013 on multiple computers. Here are the steps to follow:
On each computer that you want to install SolidWorks 2013, navigate to the shared folder and run setup.exe.
On the Welcome screen, click Install on this computer.
On the Serial Number screen, enter your serial number and click Next.
On the Summary screen, review the installation options and click Install Now.
Wait for the installation to complete and click Finish.
On the Activation screen, select Automatically over the Internet and click Next.
Wait for the validation code to be generated and displayed. You can also choose to receive an email with the validation code.
Click Finish to complete the activation process.
Downloading from the SolidWorks customer website
If you have an active subscription service contract with SolidWorks, you can download SolidWorks 2013 files from the customer website and install and validate them on your computer. Here are the steps to follow:
Go to https://customerportal.solidworks.com and log in with your email address and password.
Click Downloads and Updates under Download.
Select SolidWorks 2013 from the Version drop-down list and click Accept Agreement & Download.
Save the file sw2013_sp05_full.exe to your computer and run it.
On the Welcome screen, click Install on this computer.
On the Serial Number screen, enter your serial number and click Next.
On the Summary screen, review the installation options and click Install Now.
Wait for the installation to complete and click Finish.
On the Activation screen, select Automatically over the Internet and click Next.
Wait for the validation code to be generated and displayed. You can also choose to receive an email with the validation code.
Click Finish to complete the activation process.
Updating an existing SolidWorks installation using Check for Updates
If you have an earlier version of SolidWorks installed on your computer, you can update it to SolidWorks 2013 using Check for Updates. This will also validate your license automatically. Here are the steps to follow:
Open SolidWorks on your computer and click Help > Check for Updates.
In the Check for Updates dialog box, select SolidWorks 2013 from the Product drop-down list and click Check.
If there is an update available, click Download and Install.
On the Serial Number screen, enter your serial number and click Next.
On the Summary screen, review the installation options and click Install Now.
Wait for the installation to complete and click Finish.
On the Activation screen, select Automatically over the Internet and click Next.
Wait for the validation code to be generated and displayed. You can also choose to receive an email with the validation code.
Click Finish to complete the activation process.
How to troubleshoot common issues with SolidWorks 2013 validation code?
Sometimes, you may encounter some issues with your SolidWorks 2013 validation code. These issues may prevent you from activating your license or using SolidWorks properly. Here are some of the common issues and how to fix them:
Hardware and system problems and recommendations
If you have hardware or system problems, such as insufficient memory, disk space, or processor speed, you may experience poor performance, crashes, or errors when using SolidWorks 2013. To avoid these problems, you should follow these recommendations:
Make sure your computer meets the minimum system requirements for SolidWorks 2013. You can check them here.
Upgrade your hardware components if possible, such as adding more RAM, SSD, or a faster CPU.
Clean up your disk space by deleting unnecessary files, emptying the recycle bin, and defragmenting your drive.
Close any other applications that are running in the background and consuming resources.
Update your operating system and drivers to the latest versions.
Graphics adapters and drivers issues and recommendations
If you have graphics adapters or drivers issues, such as outdated, incompatible, or corrupted drivers, you may experience display problems, such as flickering, freezing, or artifacts when using SolidWorks 2013. To avoid these problems, you should follow these recommendations:
Make sure your graphics adapter is supported by SolidWorks 2013. You can check the list of supported graphics cards here.
Update your graphics driver to the latest version recommended by SolidWorks. You can find the recommended driver here.
Avoid using generic or non-certified drivers that may not work well with SolidWorks 2013.
If you have multiple graphics cards on your computer, make sure SolidWorks 2013 is using the correct one. You can change this in your graphics card settings or in SolidWorks Options > Performance > Use Software OpenGL.
Display and printing issues and recommendations
If you have display or printing issues, such as incorrect colors, fonts, or scaling when using SolidWorks 2013, you may need to adjust some settings in SolidWorks or in your printer. To fix these issues, you should follow these recommendations:
Make sure your monitor is calibrated correctly and has a high resolution and color depth. You can adjust these settings in your display properties or in SolidWorks Options > Colors.
Make sure your printer is configured correctly and has enough ink and paper. You can adjust these settings in your printer properties or in SolidWorks File > Page Setup.
Use the Print Preview feature in SolidWorks to check how your document will look before printing it. You can access this feature in File > Print Preview.
Use the Save As PDF feature in SolidWorks to create a PDF file of your document that you can print later. You can access this feature in File > Save As > PDF.
Error messages and possible solutions
If you receive an error message when trying to get a validation code for SolidWorks 2013, such as "Invalid serial number", "Activation limit exceeded", or "Unable to connect to activation server", you may need to contact SolidWorks technical support for assistance. Here are some possible solutions for these errors:
Error messagePossible solution
Invalid serial numberCheck that you have entered your serial number correctly and that it matches your product and license type. If you have mistyped or misplaced your serial number, contact your reseller or SolidWorks customer service to obtain it.
Activation limit exceededCheck that you have not exceeded the number of activations allowed by your license agreement. If you have activated SolidWorks on more computers than permitted, deactivate it on some of them before activating it on a new one. You can deactivate SolidWorks by clicking Help > Deactivate Licenses.
Unable to connect to activation serverCheck that you have an active internet connection and that your firewall or antivirus software is not blocking the communication with the activation server. If you have a proxy server, make sure you have configured it correctly in SolidWorks Options > System Options > General > Proxy Server Settings.
Conclusion
SolidWorks 2013 is a great software for designing and engineering 3D models. However, to use it, you need a validation code that verifies your license and allows you to activate the software. In this article, we have explained what SolidWorks 2013 is, why you need a validation code, how to get one, and how to troubleshoot common issues with it. We hope this article has been helpful and informative for you.
If you have any questions or feedback, please feel free to contact us. We would love to hear from you and help you with your SolidWorks needs.
FAQs
Here are some of the frequently asked questions about SolidWorks 2013 validation code:
Q: Can I use the same validation code for multiple computers?
A: No, you cannot use the same validation code for multiple computers. Each computer requires a unique validation code that is generated based on your serial number and your computer ID. If you try to use the same validation code for different computers, you will get an error message.
Q: Can I transfer my validation code to another computer?
A: Yes, you can transfer your validation code to another computer if you need to change or upgrade your hardware. However, you need to deactivate your license on the old computer before activating it on the new one. You can deactivate your license by clicking Help > Deactivate Licenses.
Q: How long does my validation code last?
A: Your validation code lasts as long as your license is valid and active. However, if you change or upgrade your hardware, you may need to get a new validation code for your new computer ID. You can get a new validation code by following the same steps as before.
Q: What if I lose my validation code?
A: If you lose your validation code, you can retrieve it by clicking Help > Activate Licenses and selecting Show Validation Code. You can also request an email with your validation code by clicking Request Email.
Q: What if I have more questions about SolidWorks 2013 validation code?
A: If you have more questions about SolidWorks 2013 validation code, you can visit the SolidWorks website or contact SolidWorks technical support. They will be happy to assist you with any issues or inquiries you may have. dcd2dc6462